|
Technoline P.C. (pressure
compensating) dripline has a built in flow regulated
emitter that provides a constant
discharge over a pressure range of 0.5 bar to
4.2 bar. The emitter is installed in
the tube during the extrusion process. The
prevents damage and loss of dripper
and reduces labour and installation
costs.
Advantages :-
Maximum clogging resistance. The flow rates never exceeds nominal flow
rate. Technoline P.C. is the only dripline featuring dual-opposed exit holes to
prevent re-entry of dirty during vacuum phase at the end of each irrigation
cycle. Technoline P.C emitter body is made from PE resing. The emitters
performance is not affected by changes in water temperatures.
Versatility :-
Technoline
is highly versatile. Available flow rate of Emitter 0.5 GPH (2LPH)
& 1.0 GPH (3.8 LPH).
Available Pipe size 16mm (I.D 14mm /
O.D. 16.2mm) W.T. = 1.1mm
Available spacing of emitters are 30cm,
40cm, 50cm, 60cm, 75cm, 100cm.
Technoline can be used in permanent
installation for grass lawn, commercial
& residential landscape or agriculture
crops, where it is laid and re-rolled
easily.
| FLAT IN-LINE
DRIPPER :- |
| High resistance to
clogging-each dripper features a continuous self-cleaning
mechanism. Has the ability of discharge water entirely along an 800m
length of pipe. Dual pressure comprensating system, labyrinth and
diaphragm. Integrated design which protects it from mechanical damages
by natural and man made cause. |
 |
| |
| |
|
